| Bars |
|---|
| | |
| Material Type | Stainless Steel |
| Shape | Bar |
| Length | Customizable, typically up to 12 feet |
| Diameter | Customizable, typically from 1/16 inch to 12 inches |
| Tolerance | Typically +/- 0.005 inches for diameter and length |
| Surface Finish | Cold Drawn, Cold Finished, or Hot Rolled |
| Temper | Annealed, Cold Worked, or Heat Treated |
| Corrosion Resistance | High resistance to corrosion and staining |
| Strength | High tensile and yield strength, good ductility and toughness |
| Magnetic Properties | Austenitic grades are non-magnetic, Ferritic grades are magnetic |
| Density Typically | 7.8 g/cm3 |
| Melting Point | Approximately 1450-1510 °C (2642-2750 °F) |
| Applications | Used in various applications such as construction, automotive, aerospace, medical, and food processing industries. |
| | |
| Pipes |
|---|
| | |
| Material | Stainless Steel |
| Density | 7.93 g/cm³ |
| Melting Point | 1400-1450 °C |
| Thermal Conductivity | 16.3 W/(m·K) |
| Thermal Expansion | 17.3 µm/m·K (0-100°C) |
| Specific Heat | 500 J/(kg·K) |
| Tensile Strength | 515-620 MPa |
| Yield Strength | 205-310 MPa |
| Elongation | 40-60% |
| Hardness | 90 HRB |
| | |
| Tubes |
|---|
| | |
| Material | Stainless Steel |
| Density | 7.93 g/cm³ |
| Melting Point | 1400-1450°C |
| Tensile Strength | 520-1000 MPa |
| Yield Strength | 205-585 MPa |
| Elongation at Break | 50-60% |
| Modulus of Elasticity | 190-210 GPa |
| Thermal Conductivity | 16-24 W/m*K |
| Specific Heat Capacity | 460 J/kg*K |
| Coefficient of Thermal Expansion | 17-19 × 10^-6/K |
| Electrical Conductivity | 1.45 × 10^6 S/m |
| Corrosion Resistance | Excellent |
| | |
| Sheets |
|---|
| | |
| Parameter | Description | Value |
| Material | Stainless steel | Grade 304 (or specify) |
| Thickness | Sheet thickness | 0.5 mm (or specify) |
| Width | Sheet width | 1000 mm (or specify) |
| Length | Sheet length | 2000 mm (or specify) |
| Density | Material density | 7.93 g/cm³ (or specify) |
| Surface finish | Surface roughness | 2B (or specify) |
| Tensile strength | Maximum stress before failure | 515 MPa (or specify) |
| Yield strength | Stress at which deformation becomes permanent | 205 MPa (or specify) |
| Elongation | Increase in length before fracture | 40% (or specify) |
| Hardness | Resistance to indentation HRB | 88 (or specify) |
| Corrosion resistance | Ability to withstand chemical attack | Excellent (or specify) |
| Thermal conductivity | Ability to transfer heat | 16.2 W/m·K (or specify) |
| Electrical conductivity | Ability to conduct electricity | 1.45 MS/m (or specify) |
| | |
| Wire |
|---|
| | |
| Material | Stainless Steel |
| Grade | 304, 316, 316L |
| Diameter | 0.01mm to 8mm |
| Tensile Strength | 550-1100 MPa |
| Density | 7.93 g/cm³ |
| Melting Point | 1400-1450 °C |
| Electrical Resistivity | 7.2 × 10⁻⁷ Ωm |
| Thermal Conductivity | 15 W/(m·K) |
| |
| Coils |
|---|
| | |
| Material | Stainless Steel |
| Grade | 304, 316, 430, etc. |
| Thickness | 0.3mm - 6.0mm |
| Width | 1000mm - 2000mm |
| Length | Customizable up to 6000mm |
| Surface Finish | 2B, BA, No.4, No.8, HL, etc. |
| Hardness | Full hard, half hard, soft |
| Tensile Strength | 75 ksi - 185 ksi |
| Yield Strength | 30 ksi - 150 ksi |
| Elongation | 40% - 60% |
| Corrosion Resistance | High |
| Magnetic Properties | Non-magnetic or weakly magnetic |
